USC colorful quartz glass tube liquid level meter is made from the traditional glass tube liquid level meter. The structure is much more reliable and it is featured with high-quality quartz glass tube (SiO2≥99.99%) instead of the common glass tube, and the quartz glass tube is made by special process that is high-temperature proof, so the application is much more widely compared with the traditional type. Besides, the allotypic quartz glass tube can indicated with two colors with the refraction principle. The USC colorful quartz glass tube liquid level meter with serious design, beautiful looking, temperature-preserved, corrosion-resistance and oil proof, it is widely used to test the liquid level of pressure container in petrol, chemistry and power industry.
The structure of USC colorful quartz glass tube liquid level meter
The mark of USC colorful quartz glass tube liquid level meter
Basic parameter
Port center distance ：500，800，1100，1400，1700，2000（mm) （or determined by the customers)
Work pressure： 1.6，2.5，4.0，6.4，8.0，10.0（Mpa)
Work temperature： ≤ 450℃
Connection flange standard：JB82-59 DN25 concave flange
heating system pressure： 1.0 Mpa
heating port ： ZG 1/2”
automatic ball pressure of connection valve：≥0.2 Mpa
Install and Use
All parts have be tried running with 1.5 times pressure, the customer can not disassembly the quartz glass tube, and the install of flange should be done as ruled.
Handle and open it carefully during the transportation, avoid any damage, especially the quartz tube.
Turn on the upper and lower port valve slowly after the liquid level is installed, to make the liquid flow into the tube.
The double color indication may not clear when there is pressure or liquid flow into the container, for the liquid may not clean enough or the pressure is not stable. It will be okay when the pressure is stable.
Maintenance and Troubleshooting Solution
It should be clean per period to make sure the indication is clear. The upper and lower connection valve should be open a little when clean it, and then wash it after turn on the waste drain valve. If there is no liquid, it indicated the liquid level, check whether there is block on the upper connection valve. Check whether there is leakage if the meter indicated no liquid.